Used OEM 2006 C6 Corvette wheel 9596951 with 5x4.75 bolt pattern

Corvette Bolt Pattern by Generation: C1 Through C8 Quick Reference

Corvette Fitment

Corvette Bolt Pattern by Generation: C1 Through C8 Quick Reference

Short answer: every Corvette from the C1 through the C7 uses a 5x4.75-inch (5x120.65 mm) bolt pattern. The mid-engine C8 changed to 5x120 mm.

The bolt pattern is only the first check, though. Offset, width, brake clearance, and lug thread decide whether a wheel from one generation will actually work on another. We sell a lot of Corvette wheels, and these are the questions we answer every week.

Corvette bolt pattern chart

Generation Years Bolt pattern Lug thread
C1 1953–1962 5x4.75 in 7/16"-20
C2 1963–1967 5x4.75 in 7/16"-20
C3 1968–1982 5x4.75 in 7/16"-20
C4 1984–1996 5x4.75 in (5x120.65 mm) M12x1.5
C5 1997–2004 5x4.75 in (5x120.65 mm) M12x1.5
C6 2005–2013 5x4.75 in (5x120.65 mm) M12x1.5
C7 2014–2019 5x4.75 in (5x120.65 mm) M12x1.5
C8 2020–present 5x120 mm M14x1.5

Original studs may have been replaced on older cars. Always check the actual thread on your car before ordering lug nuts.

Is 5x4.75 the same as 5x120?

No. 5x4.75 inches works out to about 5x120.65 mm, which is close to 5x120 but not identical. That half-millimeter difference is why C8 wheels and earlier Corvette wheels are not a direct swap. Some people use wobble bolts or adapters. We don't recommend improvising on a car that sees real speed.

Same bolt pattern doesn't mean the wheel fits

A C5 wheel bolts to a C4 hub, but that doesn't guarantee it clears the brakes, fenders, or suspension. Before swapping wheels between generations, check these:

  • Offset: Corvette offsets vary a lot by generation and by front vs. rear. Wrong offset can push the wheel into the fender or the suspension.
  • Width and diameter: later cars run larger, wider wheels, often staggered front to rear.
  • Brake clearance: larger brakes on Z06, Grand Sport, and Z51 cars need wheels with enough caliper clearance.
  • Center bore and seat type: make sure the lug nut seat matches the wheel.
  • TPMS: sensors vary by generation. Plan on new sensors or relearning if you change wheels.

For specific C4, C5, and C6 wheel and tire sizes, see our C4–C6 Corvette wheel and tire fitment guide.

How we list wheelsOur Corvette wheel listings include the donor generation, year, and size, with photos of the face, barrel, and any curb rash. If you're unsure whether a set will fit your car, send us your year, trim, and brake package and we'll check.

Frequently asked questions

What is the C4 Corvette bolt pattern?

5x4.75 inches (5x120.65 mm), with M12x1.5 lug thread.

What is the C6 Corvette bolt pattern?

Also 5x4.75 inches (5x120.65 mm) with M12x1.5 lug thread.

Will C5 wheels fit a C6?

The bolt pattern matches, but C6 wheels are generally larger and offsets and sizes differ. Check offset, diameter, and brake clearance before buying.

Did the C8 change the bolt pattern?

Yes. The C8 uses 5x120 mm with M14x1.5 lug thread, so earlier Corvette wheels are not a direct fit.

Shop used OEM Corvette wheels

Factory Corvette wheels and sets, photographed in detail and shipped nationwide.

Shop Corvette Parts